Once you have acquired the best pool water test kit it would be time to get your first experience in water testing and mastering the art which would save you some money in the long term. It is not a daunting task as some would like to project it but a simple DIY but would need some basics from you. We take you through the method of water testing step by step, which you could follow and after a couple of times of following the chore you could master it and call yourself an expert too.
It is when the Sun is hot and nice that we all think of the pools in our backyard and would be the appropriate time to walk into a store and get ourselves the best pool water testing kit. Start with a confident stride because it is no daunting task if you follow the instructions accompanying the kit. Depending on the pool test kit that you have bought it could be either be collecting the water in the pool adding the reagents and checking the readings against the given charts.
On the alternative some pool water testing kits with online apps could be tested against their provided standards or some you just collect the water and walk over to the supply store and check it out there. Whatever method that is convenient to you that you may choose it is imperative that you follow the instructions very clearly written on the pool water test kit.
The collection of water from the pool for testing in the swimming pool tester kit should be from a depth of at least 18 inches from the surface of the water. It would be preferable to collect water from different areas of the pool and perform the testing if you are to get an average and be confident that the conduct of the testing is perfect as it could be.
Instructions would be given as to the level to which the water needs to be filled. Do exactly as the pool water testing kits advise you to do. Any deviation could give you errors in reading which you would need to avoid.
For testing free chlorine and chlorine residual collect the water as instructed and add five drops of the chlorine indicator.
Use the caps provided and turn the vials filled with the pool water and with added chlorine indicator a few times upside down. This would mix the pool water and the chlorine indicator.
A few seconds later compare the color of the water in the vials with the color code provided in the pool water test kit manufacturer’s chart. This would give you the reading on the free chlorine level, note this down. Another few seconds later check out the color on the chlorine residual which would also need to be noted down.
To test the swimming pool water pH level, follow the same instructions by filling water into the larger tube which is provided in the swimming pool tester kit from a depth of 18 inches as before, preferably from another side of the pool. Add a drop of solution No.4 or as indicated in the pool water test kit and slowly swirl to mix both. This solution that you add for pH value determination is Sodium Thiosulfate a chlorine neutralizer.
Add five drops of solution No.2 which is a phenol red indicator and mix it up again by slowly swirling the tube. Once the water indicates a color compare it with the color code provided and note down the reading. To get the right reading do not perform this test if the reading on the previous test on the chlorine residual indicates more than 3.0.
To take an acid demand test, add acid demand titrant to a sample of the pH level test and whilst adding each drop count it and slowly swirl. The color should match the 7.4 indicator. Then refer to the acid dosage chart to add the acid needed.
Do not perform this test if the chlorine residual reading is above 3.0 and the pH level is above 7.5.
To test for total alkalinity the lower dash line needs to be filled with the pool water collecting it again as before at least 18 inches below the surface from another end of the swimming pool. Add a drop of the No,4 solution whilst again slowly swirling the vial upside down. Then add one drop of the solution which would be indicated as No.5B, which is a total alkalinity indicator and swirl again to mix them up.
Count and note down when adding the No.3 solution writing down each drop till there is a change in color which would be either clear, light yellow or light green. Then multiply the number of drops added of the No.3 solution by 10 which would give the total alkalinity in the water. This teat too should not be performed if the chlorine residual reading at the beginning was above 3.0.
After you have completed all the tests rinse the best pool test kit in a sink with running water. Do not dip it into the swimming pool. Dry everything well and keep it away from the reach of children. It is advisable to conduct these tests weekly during the season so that you are aware of what your water in the swimming is like. Ensure you buy limited amounts of the chemicals because prolonged storage could reduce the effectiveness of them and proper readings may not be forthcoming.
Important things to consider
These tests that you would conduct are important if you have a swimming pool which is used by your loved ones. Hence take the testing very seriously and ensure that they are conducted diligently. Do not cut corners and if you are in doubt of any test that you conducted and feel that there are any anomalies in the best pool water test kits that you picked up from the store, do the test again and check.
You could buy a salt water pool test kit if your pool has a salt water system which would ensure you obtain the best and accurate readings and make the pool safe for its users. Every test is important hence treat it that way and it would be your prerogative to observe and note the right color changes. If your feel your need a second opninion ask for one and be sure of what you note down.
You could compare the readings over the period of about four weeks and see whether you are getting proper readings which would give you an idea as to how you are proceeding with your new responsibility. The water testing endeavor is not a daunting one hence enjoy it whilst doing it and it could be interesting too. Keep a careful record of all your readings which would be a good reference to check how you are progressing and how the water in your swimming is behaving.
Benefits of Using a Pool Test Kit
You could be saving money by using a pool water test kit all by yourself without commissioning this very easy task to someone else. The other benefit that you would have is by doing it yourself you are at liberty to conduct the tests as and when you want it and at your own time. If you have a saltwater system then get yourself the best test kit for saltwater pools and keep your pool safe at all times.
Another benefit is that if you find any irritation whilst in the water and presume that the chlorine levels have gone up take out your pool water test kit and check out the water. If all is well you would be satisfied that there is no cause for alarm. If you have a pool it would be prudent to have your own pool water test kit and be your own master in the pool.